Jiangsu Yisu Composite New Materials Co., Ltd.

Yisu Composite is dedicated to the development of lightweight, environmentally friendly new materials, primarily manufacturing continuous‑mat‑reinforced thermoplastic sheets, continuous‑fiber‑reinforced thermoplastic unidirectional tapes, as well as composite panels and a variety of sandwich panels...

搜索历史清除全部记录
最多显示8条历史搜索记录噢~
All
  • All
  • Product Management
  • News and Information
  • Frequently Asked Questions

Using glass-fiber-reinforced PET sandwich panels as the core substrate, we have successfully developed a new lightweight dragon boat.


Release date:

2026-06-30

A brand-new lightweight dragon boat, built with a fiberglass-reinforced PET sandwich panel as its core substrate. It is an innovative sports‑equipment product recently launched by Jiangsu Yisu Composite New Materials Co., Ltd. Leveraging the company’s decades of R&D expertise in thermoplastic composites, it fills a critical market gap by advancing the green‑upgrading of material selection for dragon‑boat racing in China.

Table of Contents

  1. R&D Background and Core Compatibility Advantages of the All-New Lightweight Dragon Boat
  2. A Comparative Real-World Performance Test of Dragon Boat Products Across Different Materials
  3. Standardized Production Process for Glass-Fiber-Reinforced PET Sandwich Panels in Lightweight Dragon Boats
  4. The practical value of the new product’s launch for upgrading China’s dragon boat industry.
  5. Frequently Asked Questions (FAQ)

1. R&D Background and Core Compatibility Advantages of the All-New Lightweight Dragon Boat

This all-new lightweight dragon boat is a next‑generation product specially developed by Jiangsu Yisu to address the widespread pain points in the current dragon‑boat industry. After six rounds of iterative testing, it has now entered formal mass production. According to the “Survey Report on the Current State of China’s Dragon Boat Industry” released in 2024 by the Chinese Dragon Boat Association, among the existing domestic fleet, fiberglass‑reinforced plastic (FRP) dragon boats—accounting for 62% of the total—pose environmental challenges due to their non‑degradability after disposal, while wooden dragon boats typically have a service life of less than three years. Meanwhile, high‑end carbon‑fiber models remain prohibitively expensive, limiting their widespread adoption. As a domestic high‑tech enterprise specializing in the R&D of glass‑fiber‑reinforced thermoplastic composites, Jiangsu Yisu leverages its independently controlled material formulation system to extend the application of its flagship glass‑fiber‑reinforced PET sandwich panels to dragon‑boat manufacturing. This approach preserves the boats’ lightweight characteristics while delivering superior strength, weather resistance, and environmental sustainability, making them suitable for a wide range of applications—including professional competitions, cultural‑tourism team‑building events, and campus sports training. Since its market launch, the product has received trial feedback from 12 domestic dragon‑boat clubs, with an overall satisfaction rate of 94%.

Using fiberglass-reinforced PET sandwich panels as the core substrate, a new lightweight dragon boat has been successfully developed—this represents a next-generation dragon boat category that Jiangsu Yisu has created through structural optimization, leveraging its independently developed eco-friendly composite substrate to deliver enhanced overall performance. This product breaks entirely with conventional material‑selection approaches for dragon boats, simultaneously delivering lightweight construction, high strength, and eco‑friendly recyclability. It overcomes the industry’s longstanding limitation—that high‑performance dragon boats could only be achieved using costly carbon‑fiber materials—thereby offering a new, viable pathway for material innovation in China’s dragon‑boat sector.


2. Comparative Testing of Core Performance Across Different Base-Material Dragon Boat Products

We, in collaboration with the National Sports Goods Quality Supervision and Inspection Center, conducted standardized performance tests on products made from different base materials, all of the same size (a standard 12‑person racing dragon boat). The measured data are as follows:

 

Test data show that the all‑new fiberglass‑reinforced PET sandwich‑core dragon boat weighs virtually the same as a carbon‑fiber model, boasts impact resistance comparable to carbon‑fiber products, and significantly outperforms conventional fiberglass‑reinforced plastic boats. It also offers a longer service life, is fully recyclable, exhibits an extremely low susceptibility to mold and mildew when exposed to water, and delivers outstanding overall cost‑effectiveness—aligning closely with the General Administration of Sport of China’s strategic direction toward greener, lighter sports equipment.


3. Standardized Production Process for Glass-Fiber-Reinforced PET Sandwich Panels in Lightweight Dragon Boats

This new dragon boat employs an all‑thermal‑pressing integrated molding process, with no release of harmful solvents, and its entire production cycle complies with environmental standards. The key manufacturing steps are as follows:

  1. Custom Cutting of Glass-Fiber-Reinforced PET Sandwich Panels: Based on the streamlined structural parameters of the dragon boat’s hull, CNC‑controlled precision cutting is performed on sandwich panels of varying thicknesses, with dimensional tolerances maintained within ±0.5 mm to minimize material waste.
  2. Hot‑press integrated monolithic cabin structure: The cut sandwich panel sheets are placed into a custom‑designed mold, and a gradient hot‑pressing process within the 130°C–150°C range ensures that the sandwich panels at all locations fuse seamlessly into a single unit, resulting in a cabin with no visible joints or gaps.
  3. Surface water‑resistant and abrasion‑proof coating application: A food‑grade, waterborne, wear‑resistant coating is sprayed onto the exterior of the molded hull, enhancing the dragon boat’s water resistance, scratch resistance, and UV protection, while preventing yellowing and cracking during prolonged outdoor storage.
  4. Full-boat dynamic balancing and adjustment: In accordance with the standard weight distribution requirements for dragon boats, the vessel’s weight is carefully calibrated section by section to prevent unilateral imbalance, ensuring smooth and even paddling.
  5. 72-hour immersion load test prior to shipment: Place the finished dragon boat in a test pool 1.5 meters deep, apply simulated ballast equivalent to the weight of 12 adults, and after continuous immersion for 72 hours, verify that the hull exhibits no water leakage or deformation before dispatch.

Unlike the traditional fiberglass dragon boat manufacturing process, which generates irritating volatile emissions, Jiangsu Yisu’s all‑hot‑press production line eliminates the release of benzene‑based and aldehyde solvents, resulting in a more environmentally friendly workshop and ensuring no adverse health effects for frontline workers.


4. The Practical Value of New Product Launches for Upgrading the Domestic Dragon Boat Industry

The mass production and market launch of this brand‑new, lightweight dragon boat delivers an immediate benefit: it offers the domestic dragon‑boat industry a cutting‑edge material solution that balances performance, cost efficiency, and environmental sustainability. In the past, many cultural‑tourism sites have purchased conventional fiberglass‑reinforced plastic (FRP) dragon boats; once discarded, these vessels can only be disposed of as industrial waste, posing a significant risk of soil and water contamination. By contrast, dragon boats constructed with glass‑fiber‑reinforced PET sandwich panels can be fully recycled at the end of their service life—reprocessed into granules to manufacture new composite panels—eliminating hard‑to‑manage waste and fully aligning with China’s current “zero‑waste city” development goals. Moreover, the lightweight design makes routine transport and on‑shore storage far more manageable: a team of just two or three workers can handle the entire vessel, compared with the four to six personnel required for traditional solid‑wood boats, resulting in substantial reductions in labor costs. At present, Jiangsu Yisu has reached preliminary cooperation agreements with three national‑level dragon‑boat training centers in China. Moving forward, the company will further refine the product’s mechanical properties to meet the demands of professional competitions, thereby providing stronger support for the wider promotion of dragon‑boat sports across the country.

 

Keywords: